The BH-310 and BH-440 Series are quarter-turn electric industrial service actuators delivering up to 440 lbf-in torque in voltages ranging from 12v up through 230v in on/off or proportional control modes.
Key Features & Benefits:
- Powder Coated Aluminum Alloy Housing
- NEMA 4/4X/IP67 Enclosure
- Raised Position Indicator
- ISO5211 Compliant Mounting
- Internal Low Powered Heater
- Clutchless Manual Override
- Self-Locking Drive
- Permanently Lubricated
- Thermally Protected Motor
- 2 Auxiliary Switches
- Silicone Free
- Manual Override - Bottom 8mm Hex Shaft
- Interchangeable ISO5211 Mount
- Interchangeable Drive Inserts
- Positioners
- Extended Duty Motors
- 3 Position Control
- Passive Analog Feedback
- Torque Switches
- Local Control Stations
- 3 phase Motor Control Center
- IP68 Submersible
Unit of Measure
Torque Output |
N/A 310 inch pounds |
DC Voltage |
N/A 24 V |
AC Voltage |
N/A 24 V |
Electrical Entry |
N/A 1/2" EMT or Nylon gland |
Electrical Entry No. |
N/A 2 |
Ambient Operating Range |
N/A -22°F to +158°F |
Humidity Range |
N/A 0-95% RH |
Altitude Limit |
N/A 9850 ft |
Duty Cycle (on/off/mod) |
N/A 75 % |
Weight |
N/A 6.6 lb |
Control |
N/A 4-20mA In/Out |
Current Draw Start |
N/A 0.39 A |
Current Draw Run |
N/A 0.36 A |
Current Draw LRA |
N/A 0.48 A |
Speed (90°) |
N/A 8 s |
Motor |
N/A 10 W |
Motor Starts, per hour, Max |
N/A 1200 |
Motor Class |
N/A Class B |
